User Manual 1.0
1 Gang Touch Panel Switch
Introduction
Touch Switch with built-in Z-Wave
TM
module that can be used to connect to different devices and
be controlled wirelessly.
This product can be included and operated in any Z -Wave network with other Z-Wave certified devices
from any other manufacturers. It will act as repeaters regardless of vendor to increase reliability of the
network.
Specifications
EU: 230V 50Hz input, 3A max output (each channel)
Protocol Version 7.12
Application Version 1.02
Manufacturer ID 04 36
Product Type ID 00 04
Product ID 50 01
Installation Instructions
IMPORTANT:
A qualified electrician with the understanding of wiring diagrams and knowledge of
electrical safety should complete the installation inside the main circuit box (normally
outside your house)
Read all instructions and documentation and save for future reference
Step1 Preparing
CAUTION:
Cut off power supply at circuit breaker or fuse before installation to avoid fire,
shock or death!
Step2 Wiring
1. Connect Hot Line to “L”.
2. Connect Neutral Line to “N”.
3. Connect Load wire to “1” Terminal
