Activity Tray Table
Items: 5644G, 5644PG
Tools Required:
Phillips Screwdriver
Table Hanger Installation:
1. Lock rear casters.
2. Place table hanger assembly over back cross
brace. (See Figure 1)
3. Insert carriage bolts through square hole in
rear of hanger bracket. Add washers and wing
nuts. Tighten wing nuts.
Support Strap Installation:
1. Remove upholstery from back of chair.
2. Insert plastic rivets through grommets on ends
of strap into small holes in chair back bend.
3. Push or tap lightly with small hammer on
plunger of rivet until flush, this will lock rivet
in place. (See Figure 2)
GF0500040RevA05
Figure 1
Figure 2
Graham-Field Health Products
2935 Northeast Parkway, Atlanta, Georgia 30360
telephone: 800-347-5678, 770-447-1609
fax: 800-726-0601, 678-291-3232
http://www.grahamfield.com
