22 1/4”
19 1/8”
13 3/16”
15 3/16”
2”
SINGLE FIXTURE
Insert the fixture (A) into the surface mounting
kit (B). Place the 4 corner brackets (C) into place.
Secure in place using provided screws.
C
B
A
www.lumenwerx.com (T) 514-225-4304 (F) 514-931-4862 © All rights are reserved to LumenWerx ULC.
FILE NAME:PRIMO-SURFACE-MOUNT-INST
November 14, 2019
Page: 1 / 3
LumenWerx ULC. reserves the right to change or modify product specifications without notification
SURFACE MOUNT - INSTALLATION INSTRUCTIONS
W W W . L U M E N W E R X . C O M
PRIMO LED
NOTE
: Wire dimming conductors as Class 1
1
4
2
5
3
6
D
E
F
H
E
G
D
J
I
Make sure the power to the fixure is turned off.
Connect the driver’s power cables (H) to the
ceilling’s power feed (E) inside the fixture.
Screw brackets (D) to ceilling using diagram from
step
1
. Leave at least 6” of power feed (E) out of
the ceilling.
Screw safety cables (I) to the lens and push lens
assembly (J) into fixture.
Power can be safely turned on.
Place fixture into place using the brackets (D) from
step
3
. Screw fixture into place using provided
washers (F) and nuts (G).
