1. I/O
Introduction
5100331-50
DEC, 2018
www.MyLumens.com
5.How to Connect IP
P/T SPEED
ZOOM SPEED
VALUE
SELECT
SETUP
L/R
DIRECTION
U/D
DIRECTION
1 Power Button
6 RS232 Port
2 12V DC power supply
7 IP Port
3 Firmware Update Button
8 RS422 Port(
B Set)
4 Anti-theft Slot
9 RS422 Port
(A Set)
5 Tally Port
10 USB Port
(
for firmware update
)
2. Button Setting Instructions
■
SETUP : Keyboard Function Setting
■
P
/
T
SPEED
●
Rotate: Move the pointer
●
Press: Access selections
●
Hold down: Joystick switch left/right
(Press for 3 seconds)
■
ZOOM
SPEED
●
Rotate: Select parameters
●
Press: Save parameters
●
Hold down: Joystick switch
up/down
(Press for 3 seconds)
3. Initial setting
3.1 Connect the DC 12 V / 3 A power supply to the power port.
3.2 Use the network cable (CAT5 or CAT6) to connect the IP port on the back of the keyboard to
the local area network (LAN).
3.3 Press the power button to turn on the VS-KB30.
4. Camera Setting
4.1 Press
[
SETUP
]=>[
CAMERA SETTING] enter setting mode
4.2 Instruction on Setting
4.2.1 CAM : Set camera numbers, from 001 to 255
4.2.2 Title : Camera name, using letters and symbols on the keyboard to name the camera
4.2.3 Protocol : Camera communication method, selecting from VISCA, VISCAIP,
PELCO-D
PELCO-P,
>
CAMERA
SETTING
KEYBOARD
SETTING
EXIT
>
CAM001
TILE:-
Protocol: VISCA
EXIT
IP
Cat5 network cable
Cat5
network cable
Router
VS-KB30
Camera
5.1
Set VS-KB30 IP address
●
Press SETUP and select[KEYBOARD SETTING]=[IP CONFIGURATION].
●
Type select
STATIC or DHCP.
●
IP Address If select STATIC, use P/T SPEED to choose the location, input IP address
via numbers on the keyboard. Last, press ZOOM SPEED to save and exit.
5.2
Add Cameras
5.2.1
Automatic Search
●
Press
SEARCH
●
Select VISCA-IP
*
VISCA-IP
：
Search available VISCA over IP cameras on the internet
●
Select the target camera; set the CAMID and Title for the camera
●
Press ZOOM SPEED to save; then press EXIT to exit
5.2.2
Manual Add
●
Press SETUP, and select [CAMERA SETTING]
●
Set CAMID and Title
●
Protocol Select VISCA-IP and set the camera IP address
●
Press ZOOM SPEED to save; then press EXIT to exit
SELECT PROTOCOL
VISCA-IP
EXIT
>
Start Search?
>YES
NO & EXIT
Searched Cam: 1/5
>
192.168.0.101
EXIT
VS-KB30
Installation Guide
Cat5
network cable
Cat5
network cable
