English
-
17
Chapter 7 Descriptions of Major
Functions
7.1
I would like to automatically adjust the image to have
the best brightness and focusing performance
Use the Remote Control or Control Panel:
1. Press [AUTO TUNE] for the best brightness and focusing performance.
7.2
I would like to switch image sources
Live image
is the default image source. Press [SOURCE]
on the
remote control or control panel
to have DC172 switch among the
following images sources:
1. Live image (default).
2. HDMI IN.
[Remark] This image switch applies to HDMI OUT simultaneously.
7.3
I would like to freeze images
1. Press [FREEZE] on the
remote control
or
control panel
to freeze the
current image on the screen. Press again to defreeze.
7.4
I would like to rotate the image
Remote control:
1. Press [ROTATE] key to rotate the screen. (The sequence is:
0°/180°/Vertical flip/Horizontal flip/90°/270°).
Control panel:
1. Click [MENU] to access the setting menu and then select the [ROTATE]
function. Adjust the rotation by pressing [
] or [
].
[Note] When the HDMI output is in 90°/270° mode, the USB screen
displays as 0°, and PAN, PIP, recording function are not
available.
