IMPAC Infrared sensor IN 2000
7
Example for wiring using a PC (with separately available IMPAC USB Connector):
Note:
Additional analyzing instruments, e.g. controllers, recorders, etc.
can be connected in series as shown in drawing above.
5
Mechanical installation
For easy mechanical installation the IN 2000 is equipped with a PG11-thread incl. 2 fixing nuts.
The instrument is equipped as standard with an air purge unit (for a hose with 2 mm inner diameter) to
supply with dry and oil-free pressurized air. If the air purge is not used it can be removed and replaced by the
provided sealing screw.
5.1
Accessories (option)
The overview on the right side shows a
selection of suitable accessories. You can
find the entire accessory program with all
reference numbers on section (
Refer-
ence numbers
).
Mounting:
For easy mounting and aligning the pyrome-
ter to the measured object a fixed or adjust-
able mounting angle is available.
Cooling:
The cooling jacket protects the pyrometer if
exposed to a hot environment.
90°-mirror:
The 90°-mirror
enables the capture of ob-
jects at an angle of 90° to the pyrometer
axis.
Controller
°C
Recorder
Digital display
230 V
~
Wiring:
White:
24 V (15 … 30 V DC)
Brown: 0
V
Yellow: TxD
Green: RxD
Black: Shield
Black
4 ... 20 mA
Green
Yellow
Brown
White
Connection cable
+15 V
-, GN
D
Tx
D
RxD
fixed adjustable
90° mirror
Water cooling
jacket
Mounting angle