manualshive.com logo in svg

Lumascape ZDClink Luxor SATlink, Руководство пользователя

Поделиться
Скачать
Lumascape ZDClink Luxor SATlink Скачать руководство пользователя страница 24

24

Operating the Controller

Using Other Devices with the Controller

The controller can communicate with devices other than 
Lumascape low-voltage integrated LED boards. Two of those 
devices include the Luxor CUBE and the Luxor ZD MR-16 Lamp.

Luxor CUBE

The Luxor CUBE allows the controller to control, zone, and dim 
lighting luminaires and other device that don’t have built-in  
ZD technology. Install the CUBE in-line prior to the luminaires 
or devices you wish to control as a zone. When that zone is 
activated by the controller, all luminaires or devices in-line after 
the CUBE will initiate and dim according to the commands  
of the controller. 

The CUBE is offered in three models to ensure maximum 
flexibility:

•  Low-Voltage Lighting (LCM-LV)
•  Line-Voltage Lighting (LCM-HV)
•  Relay and 0–10 V Dimming (LCM-RLY-010V)

Luxor ZD MR-16 Lamp

The ZD MR-16 is a convenient, high-quality LED replacement 
lamp that converts incandescent luminaires to energy-efficient 
LED luminaires. When connected to a ZDClink Controller, the 
ZD MR-16 adds zoning, dimming, and control capabilities to any 
brand of low-voltage landscape lighting luminaire utilizing an 
MR-16 socket.

Figure 24: Luxor CUBE

Figure 25: Luxor ZD MR-16 Lamp

For additional information on installing the CUBE 
please use the wiring diagram located in the 
installation guide included with the product.

Содержание ZDClink Luxor SATlink









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды