21
Operating the Controller
Color
ZDC Technology adds color in addition to zoning and dimming.
A color system requires a ZDC LED board to be installed in each
desired Lumascape low-voltage LED luminaire. Standard and
ZD-enabled Lumascape low-voltage luminaires will zone and
zone and dim, respectively, but color is achieved only through
the use of specific ZDC LED boards.
Figure 20: Color palette screenshot
• Access the color palette by selecting the
Color
function from
the
Home
screen.
• Only four colors are displayed at a time. Turn the scroll wheel
clockwise to access the remaining 246 color labels.
• Use the scroll wheel to highlight the desired color label
(e.g., C1). Adjust the hue/saturation settings using one of
two methods:
1.
Color Swatch
: Scroll one click to the right to highlight the
color swatch and press the scroll wheel to open the
Color
Selection
screen. Adjust the
Hue
(top) and/or
Saturation
(bottom) by selecting the appropriate chart, scrolling left
or right until the desired setting is located, and pressing
the scroll wheel again to finalize the setting.
2.
Hue/Sat Values:
Scroll to highlight the hue or saturation
numeric values. Press the scroll wheel to select, then
scroll to choose the desired values. Press scroll wheel
again to finalize the setting.
Figure 19: Home screenshot
Color Palette
Colors are selected on the
Color Palette
screen. The controller
can store up to 250 preset colors, labeled numerically as seen in
Figure 19. Each color requires hue and saturation values. Hue is
the primary attribute of a color. The selected value is found on
the standard color wheel and is represented by numeric values
between 0 and 359. Saturation is the percentage of hue seen
with white light filling in the remainder (e.g., 80% saturation is
80% of the selected hue and 20% of white light).
Содержание ZDClink Luxor SATlink
Страница 39: ...39 Notes ...
