IMPORTANT INSTRUCTIONS
For Installation LS363
3
2
1
MODELS
LS363 Groundmount
A
START
HERE
4
5D MR16 LAMPS
5C MR16 LAMPS
Rotate gimbal to aim light at
target. Slide gimbal vertically
to minimise glare. Once
positioned tighten locking
screw using Allen Key
provided.
Adjust vertical and
rotational position
of gimbal
SLIDE GIMBAL
VERTICALLY
GIMBAL
GIMBAL
LOCKING
SCREW
ALLEN KEY
SUPPLIED
ROTATE GIMBAL
5E MR16 LAMPS
Aim the light at target by
rotating the angle adjust
screw, with the Allen Key
provided. The lamp has a
maximum adjust of 20 either
side of vertical.
o
Adjust angular
position of light
GIMBAL
ANGLE
ADJUST
SCREW
ALLEN KEY SUPPLIED
20
o
20
o
40
o
C737US - 2006_07_REV001
Further
information
over page
Site fixture in proximity to
cabling. Use discretion in
locating fixtures as glass
can become very hot and
may burn.
Locate Fixtures
140MM
(5.51IN)
80MM
(3.15IN)
160MM
(6.3IN)
Mount Bracket to Fixture
Mount bracket supplied to
fixture using the M10 dome
nuts and washers as shown
above.
DOME NUT
SPRING
WASHER
FLAT
WASHER
BRACKET
Mount fixture to secure
surface. Orientate fixture as
required and tighten nuts on
bracket.
Mount Fixture
10
o
90
o
60
o
30
o
BRACKET TOP VIEW
75MM (2.95IN)
2 X 8MM
12MM
Mount Junction Box, if
supplied, to the mounting
surface. Connect fixture to
supply cable according to
local wiring rules.
Connect Supply
Insert PL lamp into
lampholder mounted on
gear tray in bottom of fixture.
Insert reflector, locating
bottom into aluminium cup
around lampholder.
5A PL LAMPS
Insert Lamp
LAMP
REFLECTOR
Screw PAR38, or PAR30
lamp into lampholder
mounted on gear tray in
bottom of fixture. Ensure
the lamp bottoms out in
lampholder.
Insert Lamp
5A PAR LAMPS
LAMP
Remove Hood and louvre
from gimbal and insert
MR16 lamp into lampholder.
Replace hood and louvre.
Insert Lamp
GIMBAL
LAMP
HOOD/
LOUVRE
WARNING
DO NOT SHORTEN, INTERFERE OR DISCONNECT CABLE FROM FITTING. WARRANTY WILL BE VOID IF
CABLE ASSEMBLY IS TAMPERED WITH.
CAUTION - HOT BULBS. Keep Away From Curtains And Other Combustible Material.
L
U
R
C
US
SEE OTHER SIDE FOR RE-LAMPING
US Head Office
Telephone
Fax
1300 Industrial Rd., Unit #19
San Carlos, CA 94070
USA
1-(650)-595-LUMA(5862)
1-(650)-595-5820
Free Call
www.lumascape.com
(US & Canada)
1-866-695-LUMA(5862)
LUMASCAPE USA INC.
INC.
SURFACE MOUNT
SPLICE BOX
DISCONTINUED PRODUCT