background image

 

 

 
 
 

 
 
 
 
 

HDMI-CAT6 Cable Extender 

Manual 

Lumagen® Inc

.

 

 

 

 

Legal Notices: 

TO THE EXTENT NOT PROHIBITED BY LAW, IN NO 
EVENT SHALL LUMAGEN, ITS SUPPLIERS, OR ITS 
DEALERS, BE HELD LIABLE FOR INJURY TO PERSONS 
OR PROPERTY, ANY LOST REVENUE, LOST PROFIT, 
SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENCIAL, OR 
PUNITIVE DAMAGES, IMPAIRMENT OF OR DAMAGE TO 
OTHER GOODS, HOWEVER CAUSED REGARDLESS OF 
THE THEORY OF LIABILITY, RESULTING FROM THE 
USE OF, OR INABILITY TO USE, THIS PRODUCT, EVEN IF 
LUMAGEN, ITS SUPPLIERS, OR ITS DEALERS, HAS BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  

LUMAGEN SHALL NOT BE LIABLE FOR OMISSIONS OR 
ERRORS IN ITS DOCUMENTATION OR SOFTWARE.

 

LUMAGEN RESERVES THE RIGHT TO MAKE CHANGES 
TO ITS PRODUCTS AND DOCUMENTATION WITHOUT 
NOTICE. 

This equipment has been tested and found to comply with the limits for a 
class B digital device, pursuant to Part 15 of the FCC rules, Canadian ICES-
003, and CISPR 22. These limits are designed to provide reasonable 
protection against harmful interference in a residential  installation. This 
equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures: 

-  Reorient or relocate the receiving antenna. 
-  Increase the separation between the equipment and receiver. 
-  Connect the equipment into an outlet on a circuit different from that 

which the receiver is connected. 

-  Consult the dealer or an experienced radio/TV technician for help. 

Lumagen is a registered trademark of Lumagen, Inc. Vision HDP, Vision 
HDQ, RadianceXD, RadianceXE, RadianceXS, HDMI-HDMI, HDMI-CAT6 
and other Lumagen product names, are trademarks of Lumagen, Inc. Other 
trademarks are the property of their respective owners. Unauthorized 
modifications to this equipment may void Lumagen’s limited warranty and 
the user’s authority to operate this equipment. 

Содержание CAT6 FTP

Страница 1: ...nstallation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined...

Страница 2: ... an 8 position rotary switch based on its input cable length Static cable EQ has less signal jitter than dynamic cable EQ solutions This translates into the ability to support longer cable lengths 2010 Lumagen Inc page 2 of 5 Rev 1 1 When long cables or cable extenders have issues in a given system Lumagen has found that it is often due to problems with the DDC signals Since the DDC signals are ne...

Страница 3: ...ignals themselves 2010 Lumagen Inc page 4 of 5 Rev 1 1 Status Indicator Lights There are two light emitting diode LED indicator lights on the transmitter and on the receiver These show the connection status as described below ACTIVE On if the external 5 VDC power is supplied and HDMI Standby Power is active VIDEO On if the ACTIVE light is on and the video input signals are actively driven All the ...

Страница 4: ...e transmitter or receiver Input EQ is not properly set for the given cable type and cable length HDMI audio is more sensitive to cable jitter than video So the maximum cable length may be reduced if audio is being used Specifications Maximum pixel clock rate 300 MHz 3 GHz bit rate per channel which support up to 1080p120 or 1080p60 with 16 bit 4 4 4 Maximum video rate using CAT6 STP cable or for t...

Отзывы: