Luma Surveillance LUM-500-DVR-16CH, Техническое справочное руководство

Страница: 92 / 217

Luma Recorders
|
Web Interface
Jump to Main TOC 92 Jump to Web Interface
Log Page
This section provides an easily accessed list of events as recorded
by your system. The list is initially blank, and remains so until you
execute a search.
The columns in this list give, in order:
No.: An arbitrary number assigned by the system.
Time: The time stamp showing when the event began.
Major Type: The broad category of event.
Minor Type: The specific subtype of the major type of event listed.
Channel No.: The channel number of the camera involved. If no
camera was involved, this remains blank.
Local/Remote User: This shows whether the user involved (if any)
was at the DVR/NVR and using the mouse or remote control to
use the recorder, or if the user logged in remotely.
Remote Host IP: If the system as accessed remotely, this shows
the IP address of the user’s computer. If this shows 0.0.0.0, it
means that the user was local to the system (that is, using the
mouse or the remote control).
If there are a lot of event results shown, you can use the page
navigation controls at the bottom to access events not shown.
Filtering the List
To the right of the event window is the
Search Log area, where you can set filters
to search for the sorts of events you want to
look at.
You can select one selection from the Major
Types drop-down menu, or leave it as is to
view all events.
Once you have selected a major type, you
can select a specific sort of operation from
the Minor Type drop-down menu. The lets
you narrow the search within the selected
major grouping.
Below those, you can select the start and
stop time for your search.