The painted bodywork on your Luggie Scooter can be
lightly washed with clean soapy water. Do not use abrasive
cleaners or strong detergents. This could fade the color, an
auto type shampoo works well.
Do not hose down your Luggie with a powerful
cleaner. Water could be forced into the electronics and
cause permanent damage.
On the painted finish, be cautious not to wash with a dirty
cloth as this could scratch the paint finish. Auto polish can
be used to keep the paintwork and bright chrome parts in
pristine condition.
The metal framework of your Luggie should be cleaned
once a year and any paintwork damaged should be treated
to prevent further attack from the elements.
Do not store your Luggie in damp conditions. This may affect
the electronics if left for very long periods of time. Moisture,
if left unattended can cause deterioration on metal work,
protect with proprietory cleaners.
Servicing of the drive electronics and charger should only be
carried out by your local Luggie service dealer. These
units are sealed and should not be opened. BROKEN
SEALS WILL INVALIDATE YOUR GUARANTEE.
This unit is factory filled and will not normally need
additional lubrication.
Note: Your Luggie transmission is filled with a special
lubricant. Do not attempt to force grease into the
transmission as this will contaminate the original lubrication
and will invalidate your guarantee.
Take care when lifting the transmission, keep well
away from clothing. It is normal to find a light film of
lubrication around this part.
If the motor brake is functioning correctly and
the drive is engaged you will not be able to push your machine
when it is switched off. Or switched on with the speed control
lever in the 'zero speed', central position.
BODYWORK
ELECTRONICS
DRIVE TRANSMISSION LUBRICATION
MOTOR BRAKES
Motor Brake:
Remove salt contact as this
is very corrosive to bright metal parts.
Caution :
Do not operate your Luggie in exceptional weather conditions
ie. very heavy rain. Cover your machine up, if it is to be
left unattended and outside for a long period of time.
Do not drive through deep water with your Luggie. This
could damage the electronic speed controller. Sea and road
salts are very corrosive and should be neutralised quickly.
Caution :
Note: Check the Freewheeling Instructions first.
Safety Note: For your own safety, we recommend that you
check the function of your Luggie brakes prior to a journey.
BODYWORK
MOTOR BRAKES
Motor Brake:
Luggie
Caution :
Caution :
Luggie
Luggie
Luggie
Luggie
Luggie
ELECTRONICS
DRIVE TRANSMISSION LUBRICATION
Luggie
Note: Check the Freewheeling Instructions first.
When you drive your Luggie and
you let go of the speed control lever your Luggie should
reduce speed very quickly. If you Notice a change in the
normal slowing/braking condition, and your Luggie does
not slow down quickly, please do not use your machine,
contact your Luggie distributor.
Check the condition of your tyres regularly. Look for signs of
wear, cuts and foreign objects lodged in the tread ( Fig 20 ).
Your Luggie is designed with 'split' wheel rims.
Do not remove wheel bolts with the wheel inflated.
Warning :
Driving Brake:
Warning :
Driving Brake:
Luggie
Luggie
Luggie
Luggie
Luggie
21
FIG 20
TYRE SERVICING REAR WHEEL
To remove a rear wheel from your Luggie for the service of a
tyre or tube carry out the following Instructions (only
competent people should carry out this procedure).
1. Switch off your Luggie.
2. Using a suitable body stand, lift the side of the vehicle
you wish to service off the ground. Place the stand
under the chassis. Care must be taken when lifting
heavy loads, you may need a friend to help you. Care
should also be taken when working on a stand.
Please be safe. Do not lift by the plastic bodywork.
3. With the aid of a 13mm spanner(not supplied) remove
the centre hub nut and washer.
4. Slide the wheel from the mounting axle.
Rear wheels are fitted to the drive axle via a hub which
locates onto a key.These wheels fit tight onto the axle
and may need some pressure from a bearing puller onto
the wheel hub to release them from the axles. Look for
spacing washers and take care not to mislay the drive
key which fits between the wheel hub and the axle shaft.
Tore-assemble the wheel simply follow the above procedure
in reverse order noting the following points:
1. Make certain that you replace any spacing washers and
keys in the order that they were removed.
TYRE SERVICING REAR WHEEL
Luggie
Luggie
Please be safe. Do not lift by the plastic bodywork.
