5
LSL160
Horizontal use of LSL160
• Set up the unit on a surface that is as level as possible or fasten it to a tripod.
• Turn the transport lock (G) in the arrow’s “Unlock” direction to its limit. This releases the
locking mechanism that protects the pendulum during transport.
• Press the On/Off button (A).
• Within its range of +/- 3,5°, the unit will level itself automatically and the prism head will
begin to turn.
• The speed of rotation can be changed with the selector button (B), H = 600 RPM, M = 400
RPM, L = 200 RPM.
Vertical use of LSL160
• Turn the transport lock (G) in the arrow’s “Lock” direction to its limit.
• Hook the vertical/wall bracket into its receptacle (O). To do this, the locking lever (L) must
be in its lower position and the bracket must latch audibly. To release the bracket, press the
locking lever (L) down.
• Align the unit with the adjustment foot (J) as indicated by the vertical spirit level (F).
• Press the On/Off button (A). The prism head will begin to rotate.
• The speed of rotation can be changed with the selector button (B), H = 600 RPM, M = 400
RPM, L = 200 RPM.
Note:
Always unlock the transport lock when the LSL160 is being used for horizontal
levelling by turning the transport lock to its “Unlock” position. If the unit is currently
outside of its automatic levelling range (> 3,5°) , a warning signal will sound and the
prism head will not rotate. The unit must then be placed on a surface which is closer to
level. When in vertical use, the unit does
not
level itself automatically.
