Operating Manual V8.2/03.2017
Non Invasive Road Sensor
28
G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany
Fig. 14: Measurement
Polling Channels
Fig. 15: Example of
Measurement Polling
12.3 Function Test with the UMB Config Tool
The function of the sensor can be tested with the UMB Config Tool by polling various
channels.
Note:
All other devices which are used in the polling process, e.g. modems, LCOM etc.,
must be disconnected from the UMB network during the function test.
12.3.1 Channels for Measurement Polling
You can select the channel for measurement polling by the UMB Config Tool by clicking on
the respective channel.
Note:
Channel selection relates to measurement polling for the UMB Config Tool only. In
general, all channels are always available for polling and do not need to be enabled in the
sensor.
12.3.2 Example of Measurement Polling
Note:
The UMB Config Tool is provided for test and configuration purposes only. It is not
suitable for the permanent acquisition of measurement data. We recommend the use of
professional software solutions for this purpose, e.g. SmartView3.
