Lufft 8511.EAK, Руководство по эксплуатации

Страница: 93 / 158

Manual LCom
Page 93 of 158
If “GPRS Modem Active” is selected, the GPRS connection is automatically managed
by the LCom.
If a connection is established, various statistical data for the connection is displayed
on the right-hand side (updated automatically).
5.11.2 Analog-Modem
Alternatively to the GPRS modem an Analog modem for a PPP dial in connection
may be used, if this is supported by the operating system version on your device.
Please contact Lufft support if you need this option, but you see the “NOT
SUPPORTED” message as shown in above screenshot.
•
Additional modem init: additional modem initialization string. Please test if your
modem type supports/requires the default settings or requires different
settings here.
•
RS232 bps: speed for the serial connection to the analog modem
•
Auto-IP: automatically assign an IP address (random) from the address pool
defined by Auto-IP Subnet / Auto-IP Subnet mask
•
PPP-User: the user for the PPP connection
•
PPP-Password: the password for the PPP connection
•
Auto-IP Subnet: the Auto-IP Subnet
•
Auto-IP Subnet Mask: the Auto IP Subnet mask
•
Stat. IP Start: start address for the static IP addresses used when Auto-IP is
off.
5.11.3 DynDNS
The integrated DynDNS client can be configured via the “DynDNS” dialog. When the
client is active and correctly configured, the
station’s IP address is uploaded to the
DynDNS server every time the GPRS connection is (re-)established, so the station
can be accessed using the assigned DynDNS host name.