Ludlum Measurements 3014, Руководство пользователя

Страница: 26 / 100

22 CHAPTER 2. GETTING STARTED
• Used to advance between the four operating modes: RATE, MAX, COUNT, and DOSE.
Note that any combination of RATE, MAX, COUNT, and DOSE modes may be disabled
from use.
Long Press (press and release after two beeps):
• Currently has no effect.
Extra-Long Press (press and release after three beeps):
• During instrument initialization and within 4 seconds after the power-up screen, an
extra-long press of the MODE button will place the instrument into setup mode.
• Once the instrument is displaying normal operation, and 4 seconds have passed, the
button no longer has any effect.
2.7.5 LOG Button:
Short Press (press and release after one beep):
• In RATE mode, it will log the current rate reading if datalogging is enabled.
• In MAX mode, it will log the current MAX value if datalogging is enabled.
• In COUNT mode, it will:
– If COUNT mode is ready: Initiate a count. Upon completion, the result will be
logged if datalogging is enabled.
– If COUNT mode is in progress: Button has no effect.
– If COUNT mode is complete: Button will log the current result.
• In DOSE mode, it will log the current DOSE value if datalogging is enabled.
• If datalogging in Mode 2 and a log event has been initiated, the button is used to accept
the current location ID.
Long Press (press and release after two beeps):
• Currently has no effect.
Extra-Long Press (press and release after three beeps):
• In COUNT mode, it will:
Ludlum Measurements, Inc.