Ludlum Measurements 3014, Руководство пользователя

Страница: 24 / 100

20 CHAPTER 2. GETTING STARTED
Short Press (press and release after one beep):
• Normal Operation: Will increment the audio through four volume levels including
mute, low, medium, and high.
• Alarm: Will acknowledge an alarm condition by silencing the audio.
Long Press (press and release after two beeps):
• In RATE mode, it will reset the currently displayed rate if the user has permission (per-
mission set from Lumic 2.0 software).
• In MAX mode, it will reset the current MAX value if the user has permission to also
reset the RATE mode.
• In COUNT mode, it will:
– If COUNT mode is ready: It will initialize the count.
– If COUNT mode is in progress: It will reinitialize the instrument to begin the next
count displaying the count timer.
– If COUNT mode is complete: It will reset the count mode and reinitialize the in-
strument to begin the next count.
• In DOSE mode, it will reset the displayed integrated dose if the user has permission
(permission set from Lumic 2.0 software).
Extra-Long Press (press and release after three beeps):
• After 3 beeps, the countdown should begin to power off the instrument. Releasing the
button after the third beep will restart the setup menu four-second counter, allowing
you quick access into the setup menu by perfoming an extra-long press of the MODE,
without having to cycle power to the instrument.
2.7.2 UNITS Button:
In default operation, the display shows the current count rate using the Primary units. A
short press of the UNITS button (1 beep) will switch between Primary and Secondary units
(or Tertiary units in the case of alpha/beta configuration).
Short Press (press and release after one beep):
• Used to switch between Primary and Secondary units (or Tertiary units in the case of
alpha/beta configuration) in all available modes.
Long Press (press and release after two beeps):
Ludlum Measurements, Inc.