36
CHAPTER 4. SETUP MODE
cpm
kcpm
cps
kcps
dpm
kdpm
Bq
kBq
Table 4.3: Units and Multipliers
RATE/MAX Units Maximum Display (Default 999 kcpm) -
A short press of ON/OFF to select
the value to adjust, and MODE to adjust the value. Units will be the same as selected earlier
with Units and Minimium Display. Available values are:
• Ones Place (0-9)
• Tens Place (0-9)
• Hundreds Place (0-9)
• Number of Decimal Places (0, 1, or 2)
• Range (k on/off for cpm, cps, dpm, Bq)
Count Units and Minimum Display (Default 0 c) -
A short press of ON/OFF to select the
value to adjust, and MODE to adjust the value. Available vallues are:
• Number of Decimal Places (0, 1, or 2)
• Minimum Units depend on the selected Primary Units. See list below.
Primary Units
Primary Count Units Available
cps kcps
cps c
cpm kcpm
cpm c
Bq kBq
Bq d
dpm kdpm
dpm d
Table 4.4: Count Units and Multipliers
Channel Display Selection (Default 0 -
α
,
β
, and
α
+
β
) -
A short press of MODE to adjust the
value. Available values are:
• 0 –
α
,
β
, and
α
+
β
Channels
• 1 –
α
and
β
Channels only
• 2 –
α
and
α
+
β
Channels only
• 3 –
β
and
α
+
β
Channels only
• 4 –
α
Channel only
Ludlum Measurements, Inc.
