Ludlum Measurements 240 Series, Руководство пользователя, Страница: 9 / 22

Model 240 Series
User’s Manual
Section 2
Ludlum Measurements, Inc. Page 2-2 October 2020
4. Remove the existing nut from the fitting on the regulator. Insert one
end of the vinyl tubing into one of the plastic nuts and screw the nut
onto the fitting. Finger tight is sufficient.
5. Cut the subbing to the desired length to reach the top of the box on
the handle of the cart that has the flowmeters. Remove the existing
nut from the fitting on the quick disconnect above the “IN”
flowmeter. Insert the other end of the vinyl tubing into one of the
plastic nuts and screw the nut onto the fitting. Finger tight is
sufficient.
6. Proceed to the operating procedures section of this manual (Section
4).