Lucy's Home LH-HA-STMOP01-W, Руководство пользователя

Страница: 8 / 36

EN 06
ACCESSORY IMAGE SUGGESTED USE
Scraping tool
Scraping baked on food, grime,
and grease.
Removing residue or other difficult
substances from surfaces, such as
stove tops and ovens
Garment steamer cloth
For use when steaming garments,
draperies, tablecloths, etc.
Micro-fiber pad
For general cleaning of hard floors
and refreshing carpets.
CLEANING AND MAINTENANCE
Warning
Before cleaning the appliance, always switch it OFF by pushing the power switch (“O” button),
disconnect it from the mains electricity supply and allow it to fully cool down.
Cleaning
• Drain the remaining water from the water tank and clean the tank after use.
• Never use aggressive or abrasive cleaning materials or sharp objects like hard brushes or knives.
• Clean the exterior of the casing, the accessories and the power cord with a damp cloth.
• Then dry the exterior with a dry cloth.
How to decalcify in inside of the water tank:
• To clean calcium deposits that build up inside the water tank , add one or two tablespoons of white
vinegar to a full water tank and close the water tank cap . Now shake the contents.
DO NOT SWITCH
ON THE APPLIANCE.
• Let the appliance sit for a few hours. Then empty the water tank , refill it with clean water and empty
again until it is rinsed clean. Repeat these steps if there are severe calcium deposit.
Cleaning procedure for removing lime scale (descaling)
You may need to remove lime scale if your appliance starts to produce steam more slowly than usual, or
produces less steam or no steam at all. Lime scale can develop over time on metal components and greatly
affect steam performance. It is necessary to remove lime scale on a regular basis, namely every 25-50 times
that the appliance is used, particularly in areas with hard water. The frequency of lime scale removal depends
on the hardness of your tap water and how often you use the appliance.
How to remove lime scale:
• Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank .
• Secure and positon the appliance so steam is released away from the floor or surrounding objects and
surfaces.
• Plug the appliance power plug into the socket and turn the appliance ON by pressing the power switch
(“I” button), and allow the unit to produce steam until the vinegar/water solution has been used up.
•
When the water tank is empty, immediately switch OFF the appliance by pressing the power switch
(“O” button).
• Repeat the procedures above as many times as necessary until a normal steam flow rate is achieved.
• Fill the water tank with fresh water and rinse and repeat 2-3 times. Then fill the water tank with fresh water,
turn ON the appliance and let it release steam until the water tank is empty.
• The appliance is now ready to be used.
B
B
B
D
D
D
D
D
E