•
Hold the groomer with the cutting unit facing
away from you, move the trimmer along the
length of the comb.
Beard line
•
What to use: wide trimmer
•
Turn the trimmer on.
•
Hold the trimmer with the cutting blades facing
you.
•
Lightly touch the cutting blades to your face and
draw the groomer toward your beard line. For
your neck, draw the trimmer away from desired
beard line.
Around the beard
•
What to use: Mini Screen shaver attachment
•
Turn the trimmer on.
•
Use the Mini Screen shaver to shave the detail
areas around the beard.
•
Hold the trimmer so the mini screen gently
touches your skin. This allows the unit to give
you the closest shave with minimum screen
wear. Avoid holding the trimmer at an angle.
This will distort the screen and may cause some
skin irritation.
Ear
Ear canal
•
What to use: nose/ear trimmer head
•
Turn the trimmer on.
•
Gently insert the trimmer’s cutting unit into the
outer ear canal. For safe trimming, avoid insert-
ing the trimmer more than 1/4 inch into the ear
canal.
•
Rotate the groomer in a circular motion, gently
moving it in and out as you rotate.
Outer ear
•
What to use: nose/ear trimmer head
•
Turn the trimmer on.
•
Carefully guide the trimmer around surfaces of
the ear where there is unwanted hair.
Eyebrows
•
What to use: nose/ear trimmer head
•
Turn the trimmer on.
•
Carefully guide the cutting edges to stray hair
along the eyebrow line or protruding from the
eyebrow itself.
•
For best results, don’t use the trimmer to define
the entire eyebrow.
Mustache
•
What to use: wide trimmer
•
Use small comb to straighten hair for trimming.
•
Turn the trimmer on.
•
Lightly touch the cutting blades to the mus-
tache. Too much pressure
may trim more hair than desired.
•
Since the hair does not grow in the same direc-
tion, you may want to try trimming upwards,
downwards, or across.
•
Practice will produce optimum results.
Nape of Neck
•
What to use: wide trimmer
•
Use a hand mirror if you are trimming the nape
of your neck yourself. A mirror is unnecessary if
someone else is trimming for you.
•
Lift the hair up off the neck, and use your index
finger to cover the roots of any hair you DON’T
want to trim. This will serve as a bumper to pre-
vent accidentally trimming too much hair.
•
Turn the trimmer on and hold it base-side up, as
shown.
•
Touch the cutting edges to your neck, and move
the trimmer slowly up your neck until it touches
the finger that’s covering the roots of your hair.
Nose
•
What to use: nose/ear trimmer head
•
Turn the trimmer on.
•
Insert the trimmer’s cutting unit gently into the
nostril. For safe trimming, avoid inserting the
groomer more than 1/4 inch into your nostril.
•
Rotate the trimmer in a circular motion around
the opening of the nostril, gently moving it in
and out as you rotate.
Cleaning
•
Clean your trimmer regularly
•
Clean your trimmer regularly to ensure your
unit’s operating life is not prematurely short-
ened.
Cleaning attachments with water
•
Remove attachments.
•
Rinse attachments under warm running water.
Do NOT use hot water, which may cause dam-
age to components.
•
You can use a hair dryer on a cool or medium
heat setting to help dry off the attachments. If
desired.
•
! Do not use harsh or corrosive cleaners on the
unit or its cutter.
•
! Do not apply pressure or hard object to the
cutter.
Cleaning with brush
•
Thoroughly brush and blow out hair clippings
from cutter, bottom of attachments, and top of
power handle.
