1
Field Base
Action Base Cup
Figure 1
Hare Bawl Screamer with Remote
v13.b
#64209-2
Thank you for purchasing a Lucky Duck™ Premium Decoy.
To view additional Lucky Duck™ products please visit your local Sporting Goods dealer or
log onto www.luckyduck.com.
Included in your package:
•
Hare Bawl Screamer decoy (Furry rabbit cover and decoy base structure with remote receiver installed)
•
Hollow Field Base with fill cover
•
Ground Stake
•
Action base cup
•
Remote control
Getting ready to use your new decoy:
Install (4)-AA batteries (not included) in the provided battery compartment.
DO NOT MIX OLD & NEW BATTERIES. DO NOT MIX ALKALINE, STANDARD (CARBON ZINC) OR RECHARGEABLE
(ni-cad, ni-mh, etc) BATTERIES.
To do this, you will need to remove or lift up the furry rabbit cover to expose the decoy base structure and controls. Locate
the battery compartment on top of the decoy base unit. Slide the battery cover back to expose the battery compartment.
Negative (-) battery terminal goes against the springs. Replace the battery cover and furry cover. The furry cover simply
slides over the “S” wire.
Assembly Instructions:
1.
Locate a flat open area that has shorter vegetation so an approaching predator can see the decoy from a distance. You
have been provided 2 mounting options for your Hare Bawl Decoy. (Stake and Field Base). Choose which option best
suits the terrain that you will be hunting. The base has a fill hole on the bottom that is allows you to fill the base with
Sand or lead shot for extra weight to provide a solid base for the decoy to operate in areas where a ground stake will
not work.
2.
If you are using the ground stake, press or pound it into the ground about 4” before mounting the Action Base Cup.
3.
The Action Base Cup is installed next.
Step 1:
Slide the bottom of the Action Base Cup over the top of the stake and
screw stake into Action Base Cup or down into the middle of the Field Base until the bottom of the cup makes contact.
(See Figure 1
Step 2:
Gently press down until the Action Base cup bottoms out. You are ready to mount your decoy.
Step 1
Step 2