Lucent 5ESS DRM Скачать руководство пользователя страница 363 | Manualshive

Страница: 363 / 642

Lucent 5ESS DRM Скачать руководство пользователя страница 363

7.1

Perform Office Dead Start Recovery

OVERVIEW

The text and Office Dependent Data (ODD) tapes used in this procedure should be the
latest set of backup tapes made for the office.

The AM text tape for the system disk pair must be at the same software update level
as the

smtext

partition on the switching module text tape for vtoc1-MHD2/MHD3.

The first part of this procedure deals with loading the OS/3BEM, Tape Operating
Procedure (TOP), text (and ODD) backup tapes, and booting the emulated
Administrative Module (AM). The recovery of a completely powered down system may
require software and hardware checks being set during the AM recovery. If the ODD is
recovered from the backup tape, the Recent Change log files may no longer be
consistent with the recovered ODD and a text mismatch may be created between the
AM and the switching module.

The second part of the recovery is to have the AM running on the root configuration.
This is required because after booting the AM, the AM is running on the backup root
partitions. The backup root partitions are normally used for recovery situations;
therefore, it is necessary to copy the backup root partitions to the root partitions and
reboot the AM.

•

Boot the AW using a 3B21 Emulator and Operating System CD-ROM.

— Initialize the secondary disk.

— Load the AW disk from the 3B21 Emulator and Operating System CD-ROM

or a backup tape, and Boot the AW.

•

Propagate the new primary disk to the secondary disk.

•

Load TOP, AM text, and AM ODD from multi-volume formatted backup tapes.

•

Try recovery boot (in backup root) with 54 (on all configurations).

•

If AM recovers, check

/no5text/rcv/aimrc

files, and reload AM ODD if needed.

•

The following post-AM recovery actions are performed by “Post AM Recovery
Cleanup,” Procedure 7.2:

— Recover the vtoc of any outboard MHD that is new or duplex failed.

— Initialize AMA disk writer.

— Recover the switching module text on the second disk pair if software update

levels of AM text and switching module text are not matched.

— Restore switching module ODD from switching module ODD tape(s).

— Clear Recent Change Logs and RC Backout flag.

— If the switching module is not running, initialize the switching module.

— Restore MHDs to duplex.

— LATER: Copy backup partitions to root partitions (duplexes disks) and boot

the AM on root configuration with EAI poke 53.

Note:

In the event that errors are detected during this procedure, take appropriate

corrective action using the output messages manual as a first-level reference; and
then if necessary,

seek technical assistance

.

235-200-150
January 2003

SYSTEM RECOVERY

Procedure 7.1

Issue 3.00

Page 7.1-1

«
...
361
362
363
364
365
...
»

Содержание 5ESS DRM



































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов