Lucent 5ESS DRM Скачать руководство пользователя страница 193 | Manualshive

Страница: 193 / 642

Lucent 5ESS DRM Скачать руководство пользователя страница 193

4.5.3

Replace a Defective Primary Disk (

Netra

1

20)

PROCEDURE

Note:

This procedure requires a replacement disk to be available.

1.

At the login prompt, login as root.

2.

Execute the

mount

command and determine which Solaris disk the system is

running on. If the output from the mount command shows the root partition as /
on

/dev/dsk/c1t0d0s0

, the system is running on the primary disk. If the root

partition is shown as / on

/dev/dsk/c1t1d0s0,

the system is running on the

secondary disk.

3.

Is the system running on the secondary Solaris disk?

If

YES

, proceed with Step

6.

If

NO

, proceed with Step

4

.

4.

Is the AW stable enough to login?

If

YES

, stop the AW. See “Halt the Administrative Workstation”, procedure 4.2.

If

NO

, and the system is not at the

ok

prompt, enter

~^B

(tilde control b).

5.

Boot the system on the secondary disk by entering

boot disk1

at the

ok

prompt.

6.

If AM emulator is running, halt it following procedure 4.1, “Halt the
Administrative Module (AM) Emulator”.

7.

At the login prompt, login as

awadmin

8.

From the Administrative Workstation Main Menu, select “Change Operating
System booting disk”. If given multiple disks to choose from, select task “

2

” to set

the secondary disk as the default boot disk:

Response:

1) Change the Workstation Default Boot Disk to Primary Disk

2) Change the Workstation Default Boot Disk to Secondary Disk

3) Return to the Main Menu

Select task by number (1-3):

2

If prompted to set the primary disk as the default boot disk, enter

no

:

Response:

Do you want to change the default boot device to the primary disk

(disk0)?

no

If prompted to set the secondary disk as the default boot disk, enter

yes

:

Response:

Do you want to change the default boot device to the secondary disk

(disk1)?

yes

9.

When prompted, enter

return

to continue.

10.

From the Administrative Workstation Main Menu, select “Exit”

11.

At the login prompt, login as

root

.

1.

Trademark of Sun Microsystems, Inc.

235-200-150
October 2005

ADMINISTRATIVE WORKSTATION MAINTENANCE

Procedure 4.5.3

Issue 3.00B

Page 4.5.3-1

«
...
191
192
193
194
195
...
»

Содержание 5ESS DRM



































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов