manualshive.com logo in svg

Lucent 23N12, Руководство пользователя, Страница: 152 / 176

Поделиться
Скачать
Lucent 23N12 Скачать руководство пользователя страница 152

Chapter 4  Configuring the STM-1 Mode Ports and Channels Using the Console

Viewing the Channelized STM-1 Statistics

4-62

255-700-714R11.0

PacketStar

®

 PSAX 1-Port Channelized OC-3/STM-1 CES Module User Guide

, Issue 1

Release 11.0.0

Table 4-30.  Channelized STM-1 SM/MM Virtual E1 Port Statistics Window Field Descriptions

Field Name

Field Value

Description

Errored Seconds

Default: 

0

Range: 0–9999999999

Format: Numeric (sec)

Displays the number of errored seconds with at least one 
of the following characteristics per second:

•

Path code violations

•

Controlled slip events

•

Detected alarm indication signal (AIS) defect

•

Presence of bipolar violations.

Severely Errored 
Seconds

Default:

0

Range: 0–9999999999

Format: Numeric

Displays the number of severely errored seconds with at 
least one of the following characteristics per second:

•

320 or more path code violation error events

•

Out-of-frame (OOF) defects

•

Detected AIS defect

•

A count of one-second intervals with framing error 
events, an OOF defect, or a minimum of 1,544 line 
code violations.

Severely Errored 
Framing Seconds

Default:

0

Range: 0–9999999999

Format: Numeric

Displays the number of severely errored framing seconds 
encountered by the virtual DS1 port in one of the previ-
ous 96, individual 15-minute intervals. A severely 
errored framing second has one or more out-of-frame 
defects or a detected AIS (alarm indication signal) defect.

Unavailable Sec-
onds 

Default:

0

Range: 0–9999999999

Format: Numeric

The number of unavailable seconds encountered by the 
virtual DS1 port in one of the previous 96 individual 15-
minute intervals. Unavailable seconds (UAS) are calcu-
lated by the number of seconds that the interface is 
unavailable.

Controlled Slip 
Seconds

Default:

0

Range: 0–9999999999

Format: Numeric

Displays a one-second interval containing one or more 
controlled slips. The number of controlled slip seconds 
encountered by DS1 in the previous 24-hour period.

Path Coding Vio-
lations

Default:

0

Range: 0–9999999999

Format: Numeric

Displays a frame synchronization bit error in the D4 and 
E1-noCRC formats, or a CRC error in the ESF (Extended 
Super Frame) and E1-CRC formats. The number of Path 
Coding Violations encountered by DS1 in the previous 
24-hour period.

Line Errored Sec-
onds

Default:

0

Range: 0–9999999999

Format: Numeric

Displays a second in which one or more Line Code Viola-
tion error events were detected. The number of Line 
Errored Seconds encountered by DS1 in the previous 
24-hour period.

Bursty Errored 
Seconds

Default:

0

Range: 0–9999999999

Format: Numeric

Displays a second with fewer than 320 and more than 1 
Path Coding Violation error events, no Severely Errored 
Frame defects, and no detected incoming AIS defects. 
The number of bursty errored seconds encountered by 
DS1 in the previous 24-hour period.

Line Coding Vio-
lations

Default:

0

Range: 0–9999999999

Format: Numeric

Displays a bipolar violation or excessive zeroes error 
event.

Содержание 23N12

















































































































































































Отзывы:

Нет отзывов