The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Labeling the Designation Card
Page 4-3
How to Label the Blank Designation Card
4
How to Label the Blank Designation
Card
To label the designation card, do the following:
NOTE:
Be sure to print the voice terminal’s full telephone number, including the
area code, on the first call appearance button.
1. The transparent cover is attached to the frame of the voice terminal by tabs
on the top and bottom of the cover. Remove the cover by pulling the top tab
forward and then lifting the bottom of the transparent cover from the voice
terminal.
2. Print or type the desired labels on the blank designation card.
— On the 8403, print or type the assigned features on your Feature
Directory next to the appropriate number or character, and print or
type the voice terminal user’s extension in Sections a, b, and c.
— On the 8405, 8410, 8411, and 8434DX, print or type the voice
terminal user’s extension on the call appearance buttons and the
assigned features on the feature buttons.
3. Once you have placed the designation card(s) on the voice terminal, you
can replace the transparent cover by inserting the tabs at the bottom and
then pressing the top down until it clicks.
