The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Installing Your Voice Terminal
Page 3-15
Wiring Information
3
Figure 3-8.
Line Cord Routing for Wall Mount
8. Snap one end of the coiled cord into the Handset jack (labeled
), as
shown in Figure 3-8. On the 8403, thread the cord into the channel leading
to the side edge of the voice terminal; the handset cord will then lead off
the side of the voice terminal.
!
WARNING:
Do NOT insert the handset cord into the Adjunct jack. It may cause
equipment damage.
9. Snap the free end of the 1-foot line cord into the wall jack.
10. Place the base of the voice terminal on the wall-jack mounting studs, and
pull downward until it is secure, as shown in Figure 3-9.
Line jack
Handset jack
Notched Line
holder
cord
Coiled Line
cord
