manualshive.com logo in svg

Lucent Technologies SPIRIT 2448, Руководство администратора

Поделиться
Скачать
Lucent Technologies SPIRIT 2448 Скачать руководство пользователя страница 15

Instructions for Customizing

Following are step-by-step instructions for customizing.

■ 

STEP 1 PRESS ONE OF THE INTERCOM BUTTONS ON TELEPHONE SET 10

An INTERCOM button press times out after five seconds. If more than five seconds elapse
before you proceed to STEP 2, press the INTERCOM button again.

■ 

STEP 2 PRESS SPEAKER (or lift the receiver)
You will hear a dial tone.

■ 

STEP 3 DIAL 

✱ 

9 2 4 4 8

You will hear a confirmation tone. If you do not hear the confirmation tone, hang up and
start over.

■ 

STEP 4 PLACE ADMINISTRATION OVERLAY

(This step is not necessary if you are going to reset features back to the installed setting or
enter SpeedCall numbers and do no other customization.)
Place the administration overlay on telephone set 10. The overlay is provided in the pocket on
the back cover of this manual. The ENTER ADMIN light will be on to show that the system is
ready for administration. No calls may come in to or go out from telephone set 10 during
customization.

■ 

STEP 5 CHOOSE KIND OF CUSTOMIZATION

The chart on pages 10 and 11 shows six customizing choices at the top. The chart also shows
what customizable features are reached through each choice. Using the chart as a guide, make
the appropriate choice.

● 

Dial 0 to reset the system. (All telephones except set 10 must be idle. If a telephone other

than set 10 is in use you will hear a busy tone and the system will not reset.)

● 

Dial 1 to do System Customization.

● 

Dial 2 to do Telephone Customization.

● 

Dial 3 to store or erase numbers in the System SpeedCall memory.

● 

Dial 4 to customize the SMDR Call Report feature.

● 

Dial 5 to print customization information.

■ 

STEP 6 COMPLETE CUSTOMIZATION CHOSEN IN STEP 5

Following the instructions on pages 14-27, complete the customization chosen in STEP 5.

■ 

STEP 7 BEGIN ANOTHER KIND OF CUSTOMIZATION

To continue with another kind of customization, press the ENTER ADMIN button and repeat
steps 5 and 6. For example, if you complete the desired customization under System Customi-
zation and want to continue with Telephone Customization, press the ENTER ADMIN button
and repeat steps 5 and 6.

■ 

STEP 8 EXIT CUSTOMIZATION

When you are finished or want to stop customizing, replace the receiver (or press SPEAKER).

Replace the Administration Overlay in the pocket on the back cover of this manual.

Administration Manual   13

Содержание SPIRIT 2448








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды