Lucent Technologies PortMaster 4, Руководство по настройке

Страница: 74 / 191

User Types
5-2 PortMaster 4 Configuration Guide
To display the current users in the user table, for example, enter the following
command:
Command> show table user
Name Type Address/Host Netmask/Service RIP
---------------------------------------------------------------------------
jozef
Netuser negotiated 0000000000
adele Login User default Telnet
elena Netuser assigned 255.255.255.255 No
taffy Login User defaults PortMaster
john Netuser 192.168.7.8 0000000000 No
To display configuration information for a particular user, for example, use the following
command:
Command> show user elena
Username: elena Type: Dial-in Network User
Address: Assigned Netmask: 255.255.255.255
Protocol: PPP Options: Quiet, compressed
MTU: 1500 Async Map: 00000000
Adding Users to the User Table
You must add users to the user table before configuring any settings for them. The
username is a string of from 1 to 8 printable, nonspace ASCII characters. The optional
user password is a string of from 0 to 16 printable ASCII characters. You cannot add
users with blank usernames.
To add a login user to the user table, use the following command:
Command> add user Username [password Password]
To add a network user to the user table, use the following command:
Command> add netuser Username [password Password]
Note – To add a network user, you must use the netuser keyword. Thereafter, you can
use either the netuser or the user keyword to configure settings for the network user.
You must always use the user keyword when configuring login users.
Deleting Users from the User Table
To delete a user from the user table, use the following command:
Command> delete user Username
User Types
User settings define the nature and behavior of dial-in users. The user table contains
entries for each defined dial-in user along with the characteristics for the user.
✍