manualshive.com logo in svg

Lucent Technologies PARTNER II Release 4.1, Инструкция по программированию и эксплуатации, Страница: 203 / 363

Поделиться
Скачать
Lucent Technologies PARTNER II Release 4.1 Скачать руководство пользователя страница 203

Hold Disconnect Time (#203)

Description

This System Programming procedure lets you change the hold disconnect time
for an outside line. When a caller on hold hangs up, the local telephone
company may send a special signal to the system to free the line. There are two
possible signals: a long signal (450 milliseconds) used by most telephone
companies, or a short signal (50 milliseconds) used by a few telephone
companies. The length of the signal is called the hold disconnect time. If you
put a call on hold and the caller hangs up, but the call does not disconnect
within a minute after the caller hangs up, use this procedure to change the hold
disconnect time.

Considerations

■

■

If the telephone company does not send a signal, keep the hold disconnect
time set to Long. The user must disconnect a held call manually by
retrieving the call then hanging it up.

Change the hold disconnect time only if abandoned calls do not disconnect.

Valid Entries

1 = Long (450 msec.)   

✔

2 = Short (50 msec.)

Programming

To change the hold disconnect time:

1.

2.

3.

4.

5.

6.

Press [

 Feature 

] [

 0 

] [

 0 

] [

 System Program 

] [

 System Program 

] [

 # 

] [

 2 

] [

 0 

] [

 3 

].

Enter the first line number. For example, to program line 1, press [

 0 

] [

 1 

].

To change the hold disconnect time, press [

 Next Data 

] until the appropriate value

displays.

To program the next line, press [

 Next Item 

] or [

 Prev Item 

] until the line number

shows on the display. Then repeat Step 3.

Repeat Step 4 for each line in the system.

Select another procedure or exit programming mode.

5-106     

Hold Disconnect Time (#203)

Содержание PARTNER II Release 4.1












































































































































































































































































































































































Отзывы:

Нет отзывов