Lucent Technologies PARTNER Endeavor 362 Скачать руководство пользователя страница 352

Страница: 352 / 407

Problems with Combination Extensions

6-21

Problems with Combination Extensions

Phone Does Not Work Properly

Possible Cause 1:

Standard phone is not plugged into the Tip Ring ports, which

are the bottom two ports on the processor or 362EC module.

What to do:

Plug the standard phone into the bottom two ports of any module.

■

If the phone rings, the problem is solved.

■

If the phone still does not work properly, go to Possible Cause 2.

Possible Cause 2:

Ringer equivalents are too high for the extension.

What to do:

Be sure the total of the two devices’ Ringer Equivalence Numbers

(REN) does not exceed 2.0. If it does, unplug one of the devices.

■

If the phone works properly, the problem is the REN was too high.

■

If the phone still does not work properly, go to Possible Cause 3.

Possible Cause 3:

Auxiliary device (such as a fax, answering machine, or modem)

is faulty.

What to do:

Remove the auxiliary device from the extension. Then plug in an

auxiliary device that you know works properly.

■

If the phone works properly, the problem is the auxiliary device. Replace
the auxiliary device.

■

If the phone still does not work properly, go to Possible Cause 4.

Possible Cause 4:

Phone is plugged into the wrong jack of the system phone or

the bridging adapter.

What to do:

Plug the phone into the correct jack—see the

PARTNER Endeavor

Installation

guide for instructions.

■

If the phone works properly, the problem is solved.

■

If the problem remains, go to Possible Cause 5.

Possible Cause 5:

Wrong bridging adapter is used in combination extension.

What to do:

First, unplug the bridging adapter from the wall jack. Then, unplug the

phone from the adapter and plug the phone directly into the wall jack.

■

If the phone works, there is a problem with the bridging adapter. Replace
the bridging adapter (use only a Lucent Technologies 267F2 bridging
adapter).

■

If the phone still does not work properly, call the hotline.

Содержание PARTNER Endeavor 362
























































































































































































































































































































































































































Результаты поиска

Содержание PARTNER Endeavor 362

Отзывы:

Похожие инструкции для PARTNER Endeavor 362

Бренды по названию

Популярные бренды

Lucent Technologies PARTNER Endeavor 362, Руководство по программированию и эксплуатации

Результаты поиска

Содержание PARTNER Endeavor 362

Отзывы:

Похожие инструкции для PARTNER Endeavor 362

Бренды по названию

Популярные бренды