Intercom Auto Dial button
A button that is programmed to ring or page
another extension whenever the button is pressed.
The button can be used to call the extension or to
transfer a call to the extension with one touch; the
lights next to the button also show calling activity for
the extension.
See also Manual Signaling.
Intercom call
A call that is made to another system extension.
Internal call
See Intercom call.
L
Line
The transmission path between your control unit
and the local phone company’s Central Office, used
for incoming and outgoing calls.
Line button
A button with status lights on a system phone that
represents a specific line for making calls.
Line hunting
Line jack
The location on a PARTNER ACS processor module
and 206 and 400 modules that allows you to
connect outside lines to the control unit.
Line number
The number assigned to each line jack on a
PARTNER ACS processor module, a 206 module, or
a 400 module. Line numbers run consecutively
from 01 through 15.
Line Reserve
A system feature that lets you reserve a busy line
(by pressing the busy line button without lifting the
handset) so your phone beeps when the line
becomes free.
Loudspeaker paging system
Equipment that lets you make announcements over
the loudspeaker from a system extension. Any
Lucent Technologies paging system can be
connected to the PAGE jack on the processor
module in the control unit.
See also Simultaneous
M
Mailbox
See Voice mailbox.
Manual Signaling
A feature that lets a user signal an extension by
pressing a programmed button. The phone at the
target extension beeps for as long as the button is
pressed. Alternatively, the Manual Signaling button
can be used to ring or voice signal the target
extension.
See also Intercom Auto Dial button.
Music-on-hold system
Equipment that lets you play recorded music or
messages to callers who are placed on hold. A
music-on-hold audio source can be connected to
the RCA jack on the processor module in the
control unit.
See also Background Music.
N
Network interface jack
A jack, generally located in your equipment room,
that provides access to an outside line coming into
your building from your local telephone company.
A line cord from the network interface jack to a line
jack on a PARTNER ACS processor module, a 206
module, or a 400 module connects the line to your
system.
Night Service
A feature that automatically redirects calls received
after hours or when a receptionist is not available to
answer calls. (This feature also activates night
service operation of the voice messaging system.)
See also Password.
O
One-touch Intercom Calling button
See Intercom Auto Dial button.
Outside line
See Line.
GL-4
Glossary
Содержание PARTNER Advanced Communications System Release 1.0
Страница 6: ...iv...
