![Lucent Technologies PARTNER Advanced Communications System Release 1.0 Скачать руководство пользователя страница 220](http://html1.mh-extra.com/html/lucent-technologies/partner-advanced-communications-system-release-1-0/partner-advanced-communications-system-release-1-0_programming-and-use-instructions_1946160220.webp)
Message Light On (F09XX)
Description
This feature turns on the message light at a specified extension (where
XX is an
extension number from 10–41).
Related Features
For instructions on turning off the message light, see
You may be able to use this feature to signal someone at a doorphone
extension. See
Doorphone Extension (#604 and #605)
Considerations
This feature turns on the message light on system phones and standard
phones that have message lights. (See “Standard Telephones” in Chapter 1
for a list of standard phones that have message lights.)
For message-waiting capability, standard phones with LED-compatible
message-waiting lights must be connected to a PARTNER ACS processor
module, or to an R3.1 or later 206 module in a system equipped with a
PARTNER ACS processor module.
On a standard phone, the message light
flashes (only when the phone is
idle) to indicate that the extension has received a message.
Do not use this feature for an extension that is covered by the voice
messaging system. The voice messaging system automatically turns on the
message light at a subscriber’s extension when a message is left in the
mailbox.
If you use this feature to signal someone at a doorphone extension, you
must use Message Light Off to turn the light off.
You can program a Message Light On button on a system phone to turn the
message light on at a specific extension with one touch.
Programming
(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as
s
and
e
on system phones.)
To program a Message Light On button:
1.
Press
f
0
0
s
s
c
at extension 10
or 11.
2.
Enter the number of the extension to be programmed with this feature.
3.
Press a programmable button.
4.
Press
f
0
9
.
5.
Optionally, dial the two-digit extension number of your most common
destination, or skip to Step 6 if you want only the feature code on the
button.
6.
Program another button for this extension or exit programming mode.
Message Light On (F09XX)
5-127
Содержание PARTNER Advanced Communications System Release 1.0
Страница 6: ...iv...