Lucent Technologies PARTNER Advanced Communications System Release 1.0 Скачать руководство пользователя страница 143

Страница: 143 / 365

Conference Drop (F06)

Description

This feature drops the last outside party added to a conference call, without
disconnecting the other parties.

Related Features

For instructions on setting up conference calls, see

Conference Calls

You can use

Outside Conference Denial (#109)

to disallow conference

calls with multiple outside parties.

Considerations

You can program a Conference Drop button on a system phone to use the
feature with one touch.

Programming

(See Figure 2-3 in Chapter 2 for the location of special programming buttons
such as

and

on system phones.)

To program a Conference Drop button:

Press

at extension 10

or 11.

Enter the number of the extension to be programmed with this feature.

Press a programmable button.

Press

Program another button for this extension or exit programming mode.

Using

System Phone

Press the programmed button or press

The last-added outside party is dropped from the conference.

Standard Phone

Press the switchhook down once rapidly.
The last-added party (inside or outside) is dropped from the conference.

5-50

Conference Drop (F06)

Содержание PARTNER Advanced Communications System Release 1.0














































































































































































































































































































































































Результаты поиска

Содержание PARTNER Advanced Communications System Release 1.0

Отзывы:

Бренды по названию

Популярные бренды

Lucent Technologies PARTNER Advanced Communications System Release 1.0, Инструкция по программированию и эксплуатации

Результаты поиска

Содержание PARTNER Advanced Communications System Release 1.0

Отзывы:

Бренды по названию

Популярные бренды