255-700-585
1-7
PacketStar
®
PSAX 3-Port DS3/E3 ATM Protection Module User Guide
, Issue 1
Release 10.0.0
Chapter 1 Getting Started
General Navigational Guidelines
General Navigational Guidelines
Selecting Options, Fields, and Commands Using the Console Interface
Follow these guidelines to select an option, field, or command on the PSAX
console interface windows and to navigate through the windows:
•
To select an option, field, or command
, do one of the following:
~
Press the Up, Down, Left, or Right Arrow to highlight (reverse video
image) the option name, field name, or command you want to select and
press Enter as many times as necessary until the field choice you want is
displayed.
~
Use the alternate keys, K=UP, H=LEFT, L=RIGHT to highlight (reverse
video image) the option name, field name, or command you want to
select and press Enter. (You can optionally redefine these alternate keys
from the User Options window, which is accessible from the Console
Interface Main Menu window.)
~
To quickly select a command, you can also simultaneously press Ctrl and
the letter underlined in the command.
Once an option name, field, or command is selected, the system responds
as described in Table 1-3.
•
To navigate through the Console windows
, use the shortcuts listed in
Table 1-4.
Table 1-3. System Responses to Selecting Options, Fields, or Commands
For a selected...
the following occurs:
option name
The window corresponding to the option name is displayed.
field
The following variations occur:
•
The field entry area is blank or contains the default or previously
entered value. Press Enter to enter or change data in this field. Press
Enter again to exit edit mode.
•
The field entry area, like the field name, is displayed in reverse video
image and contains a predefined set of values, which you can view or
select by pressing Enter to navigate forward through these values. To
navigate backward through these field values, press Ctrl+H or the
Backspace key.
Read-only fields, which you cannot change, are enclosed in square brack-
ets (example:
[LineStatus]).
command
The following variations occur:
•
A message in the information line indicating an error or successful com-
pletion of the command is displayed.
•
The next higher level or previous window (
window name
) is displayed.
•
The next lower level or succeeding window (
window name
) is displayed.
Содержание PacketStar PSAX 45N74
Страница 103: ......
Страница 104: ...Part Number 570M0A10001D1 Copyright 2004 Lucent Technologies All rights reserved ...
