Lucent Technologies Orinoco WavePOINT II, Руководство по началу работы

Страница: 39 / 66

3-4 ORINOCO WavePOINT-II - Getting Started
Beyond Quick-Start... - Introduction
General Requirements 3
The ORiNOCO management tools requires a TCP/IP networking protocol to
communicate with the WavePOINT-II AP devices.
To allow proper addressing via TCP/IP you must:
■ Assign a unique IP addresses to each WavePOINT-II AP in your
network.
■ Install the TCP/IP protocol on each computer that you will use to run the
AP Manager program, and ensure that these computers have a unique
IP address as well.
Unique IP addresses can be assigned:
■ Automatically, if your network includes a BOOTP or DHCP server.
■ Manually by the LAN administrator.
LAN administrator’s station
Requirements
3
To install the ORiNOCO AP Manager software, select a networked computer
that satisfies the following requirements:
■
A 80486 or later processor.
■
Free disk space of 4 Mb.
■ 8 Mb RAM (16 Mb or more recommended).