Lucent Technologies OneVision DEFINITY G3 Fault Management, Руководство по установке и интеграции

Страница: 62 / 65

Telnetting to the Proxy Agent
50 Issue 1 August 1996
6. Once you have logged in, execute the Proxy Agent application by
entering the command
g3-ma
. The system opens the G3-MA main
screen.
NOTE:
The Proxy Agent is based on existing AT&T PBX management
software called Generic 3 Management Applications (G3-MA).
For this reason, you enter commands and view screens that
operate like the G3-MA interface. If you already have G3-MA, then
you will be familiar with how to use the Proxy Agent.
7. Press
Return
to continue. The system then opens the Main Menu. If you
do not press
Return
, the system opens the Main Menu on its own after a
few seconds of waiting.
8. If you are new to G3-MA and the Proxy Agent, you should begin by
reading the Proxy Agent online guide. To do so, enter
online-guide
at the command line prompt. Otherwise, enter
proxy-agent
at the
command line prompt.
NOTE:
You can get help by entering
Ctrl-y
at any time.