manualshive.com logo in svg

Lucent Technologies MERLIN Plus Release 2, Системное руководство, Страница: 207 / 337

Поделиться
Скачать
Lucent Technologies MERLIN Plus Release 2 Скачать руководство пользователя страница 207

Intercom

DESCRIPTION

Preference

Intercom Preference provides an intercom line immediately upon touching
Speakerphone  or lifting the handset.

CONSIDERATIONS

If you are at a voice terminal that either has Intercom Preference or has no
outside lines assigned to it, you will be connected to an intercom line when you
touch Speakerphone  or lift your handset.

NOTE:

This feature does not remove access to outside lines from the voice

terminal; outside lines can only be removed by the attendant at the
attendant console during administration. If you want to  restrict access
to outside lines for a voice terminal located in a lobby or public area,
you would have to administer this restriction. However, to provide the

convenience of an intercom line immediately upon pickup, use
Intercom Preference.

ADMINISTRATION

PROGRAMMING

T

 

P

T

 

P

HOW TO USE

None

To program Intercom Preference:

1   

Slide the T/P switch to  P.

2   

Dial ****.

3   

Slide the T/P switch to the center position.

If the voice terminal you are using has been programmed for Intercom

Preference, you will be connected to an intercom line when you either touch
Speakerphone  or lift your handset.

5-88   MERLIN Plus System Features

Содержание MERLIN Plus Release 2


















































































































































































































































































































































Отзывы:

Нет отзывов