Installation
2-6
Issue 1 January 1997
Skip in a minimal setup
4.
Follow the screen instructions to:
a.
Register your name (required) and your company.
b.
Skip viewing the
README.TXT
with the No button.
c.
Accept the default directory (c:\microcom) for installation.
d.
Accept the default installation options (Carbon Copy Host).
5. Screen instructions will prompt you to install Disk #2 and Disk #3. (Disk #4 is not
used with the above options.)
As configuration checks are carried out, you may be prompted to replace
existing drivers and/or older Carbon Copy files. Choose Yes to replace them.
6.
The Modem Wizard dialog box appears.
a.
To have it detect and configure your modem, select Yes, then OK. Follow
instructions when other verification dialog boxes appear, then proceed to step 7.
b.
To configure your modem manually, select No and proceed as follows:
i.
When the Communications dialog box appears, select Serial Port then the
Setup button.
ii.
When the Serial Port Setup dialog box appears, select the Port, Modem, and
Speed used (see Appendix C for modem specifications). If your modem is
not listed, select AT Compatible.
iii. Select Test to check the connection. (If it fails, verify port settings and
repeat.)
iv. Select OK to continue.
7.
Select No if prompted to convert password tables or modify the
autoexec.bat
file.
Select Yes to save suggested changes in an
autoexec.ccw
file.
8.
When the Setup program concludes,
it informs you that Windows will restart.
Select OK to acknowledge the message.
Содержание MERLIN LEGEND Reporter
Страница 1: ...MERLIN LEGEND Reporter Installation and Use...
Страница 96: ...PSU at a Polled Site Issue 1 January 1997 7 5...
Страница 121: ...Worksheets Issue 1 January 1997 A 15...