Lucent Technologies MERLIN LEGEND Release 7.0, Руководство по системному программированию, Страница: 583 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-381 QCC Optional Features
3
Cons
Console/Display Instructions Additional Information PC
5. Enter the maximum number of calls allowed in QCC queue before operators are
notified (
nn
=
0
to
99
).
Use
0
to specify that operators are not notified.
Dial or type
[nn].
Ã
6. Save your entry.
Select
Enter.
7. Return to the System Programming menu.
Select
Exit
two times.
Elevate Priority
3
Use this procedure to specify the length of time before calls waiting in the QCC
queue are automatically reprioritized to a higher level. If priority is set to 0, calls
are not prioritized.
Summary: Elevate Priority
3
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 6a, Optional Operator Features
Factory Setting 0 seconds
Valid Entries 0 and 5 to 30 seconds
Inspect No
Copy Option No
Console Procedure
Operator
→
QueuedCall
→
ElvatePrior
→
Drop
→
Dial no. of seconds (0 and 5
–
30)
→
Enter
→
Exit
→
Exit
PC Procedure
→ → →
7%
+
% I
→
Type no. of seconds
(0 and 5
–
30)
→ → →