Lucent Technologies MERLIN LEGEND Release 7.0 Скачать руководство пользователя страница 156

Страница: 156 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming

555-670-111

Issue 1

April 1999

Programming with SPM

2-30

Using SPM

Specify a backup filename.

■

To select the default filename, use the arrow keys to highlight

backup.ams

and press

. Go to Step 6.

■

To enter a different filename, use the arrow keys to select

MAKE

NEW

FILE

and press

. Go to Step 5.

Type the new filename and press

You can specify a drive letter with the filename, but no path information.

Verify that the filename chosen does not already exist.

This screen appears only if the filename chosen already exists. Continue with
Step 7 if this screen does not appear

View the backup status screen.

SPM indicates the status of the backup by displaying the number of the last block
received (

). Line 2 of the display screen shows the estimated number of blocks

to be sent from the control unit (

xxx-xxxx

). This line is blank if you are backing

up from Release 1.0.

Press ESC to Abort.

If you are working from the floppy drive,

\ appears on the screen.

Enter filename:

(default is backup.ams)

The file already exists.

If you continue, the old

Press

to abort the backup.

version will be deleted.

Go to Step 1 to create a different backup

Press ESC to abort.

file.

or c to continue.

Press

to continue.

Go to Step 7.

Press ESC to Abort.

filename

= backup filename

Est. Blocks:

xxx - xxxx

specified in Step 5

filename

BACKUP IN PROGRESS

Received Block xx

Содержание MERLIN LEGEND Release 7.0



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MERLIN LEGEND Release 7.0

Отзывы:

Похожие инструкции для MERLIN LEGEND Release 7.0

Бренды по названию

Популярные бренды

Lucent Technologies MERLIN LEGEND Release 7.0, Руководство по системному программированию

Результаты поиска

Содержание MERLIN LEGEND Release 7.0

Отзывы:

Похожие инструкции для MERLIN LEGEND Release 7.0

Бренды по названию

Популярные бренды