20
␣Call Waiting␣
If Call Waiting is on, you hear a call-waiting
tone when a call comes in and all your lines
are in use. This feature works only on
SA
and
ICOM
buttons, not on line buttons labeled
with phone numbers.
When a call is waiting, you hear a single beep
(inside call) or two beeps (outside call).
To complete a call and answer a waiting call:
1. When you hear the call-waiting tone, hang
up.
2. When the phone rings, lift the handset or
press the
Speaker
button.
To put a call on hold and pick up a waiting call:
1. Press the
Hold
button.
2. Press an
ICOM Originate Only
or
SA
Originate Only
button. (You must have
one of these buttons available to pick up
the call.)
3. Press the
Feature
button and dial
87
.
4. To return to the call on hold, press the
button with the fast-flashing green light.
To turn Call Waiting on or off:
1. Press the
Menu
button and select
Ext
Program [Prog].
2. Select
Start and press any line button.
3. Select
ListFeature [List].
4. Select
CallWaiting [CWait] and then select
On or Off.
5. Select
Enter and press the
Home
button to
exit programming.
␣Coverage␣
To program:
See
Programming Buttons & Settings
Coverage allows to your extension to ring
elsewhere, so that they can be handled by
someone else. If your system has voice mail,
your calls can also be covered that way. There
are three types of coverage:
•
Primary Coverage.
If your calls are
covered this way, they ring immediately at
the covering phone.
•
Secondary Coverage.
The covering
phone rings after a delay of 2 rings, giving
you a chance to answer first.
•
Group Coverage.
Calls for a group of
people (coverage group) may be covered
by one or more people. Your system
manager can tell you how this works at
your office..
Covering phones are programmed with
Cover
buttons used to answer calls for others. Delay
Ring on the covering phone can add a longer
delay before your calls ring there. If line
buttons on your phone are set to No Ring,
however, calls on those lines are not covered
(see
To control coverage of inside calls, use these
programmable settings: Coverage Inside On
allows your inside calls to ring elsewhere;
Coverage Inside Off turns inside coverage off.
You can also program buttons for these
Coverage features:
• Use a
Coverage VMS
button to prevent
or allow coverage of your outside calls by
a voice mail system. These calls may still
be covered by a person at another
extension.
• Use a
Coverage Off
button to turn off or
on all coverage of your calls.
Often-Used Features
␣Camp-On␣
To program:
See
Programming Buttons & Settings
Use this feature to hold a call at a busy
extension; the call rings when the extension is
available.
To camp on a busy extension so the call will
ring at the extension when available:
1. Press the
Home
button.
2. Select
CampOn [Camp].
Note:
Do not use Camp-On if your system is
equipped with a voice mail system.
