Lucent Technologies CentreVu Скачать руководство пользователя страница 89

Страница: 89 / 198

Defining the Data for a Custom Report

CentreVu CMS Custom Reports

Defining Bars in a Report

4-31

Step 5: Define
the Bar Scale

Enter an

to select an option in the

Scale

list.

●

Scale with tick marks

The scale appears in the report as a line, segmented by evenly spaced
marks (see

Figure 4-8

). For a vertical scale, a tick mark appears for

each vertical character space. For a horizontal scale, a tick mark
appears at every fifth horizontal character space.

●

Scale without tick marks

The scale automatically appears in the report as a line parallel to the bar
(see

Figure 4-8

). The line will be a fixed length equal to the maximum

length of the bar. In this way, the end of the scale always represents the
maximum graph value you define.

●

No scale

The bar does not have a scale (see

Figure 4-8

). You may want this

option if the scale defined for another bar applies to the bar you are
currently defining. For example, in

Figure 4-8

, the scale for the

ACD

Calls

bar could apply to the

Abandons

bar.

A scale defined for one bar appears in correct relation to other bars only
if the following are true:

— All bars are parallel, have the same maximum length, and have the

same starting points.

— All bars have the same maximum graph value.

— All bars display the same units (number of calls, averages,

percentages, number of seconds, and so on).

Note

Do not enter any text or fields in the column immediately to the
left of a vertical bar. And, do not enter any text or fields in the row
immediately above a horizontal bar.

Содержание CentreVu







































































































































































































Результаты поиска

Содержание CentreVu

Отзывы:

Lucent Technologies CentreVu, Руководство пользователя, Страница: 89 / 198

Результаты поиска

Содержание CentreVu

Отзывы: