Lucent Technologies CentreVu Supervisor, Руководство по установке и началу работы

Страница: 84 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Getting Started with CentreVu Supervisor
Logging Into CMS Server — After First Time
5-10
Logging Into CMS Server — After First Time
5
After you have logged into Supervisor for the first time and established your
login ID and password, the login procedures change slightly. Follow the
procedures below for automatic and manual login.
Automatic Login
5
If the connection settings were established for automatic login, you will use the
Automatic Login dialog box. Now, each time you open the Supervisor
application, the Supervisor Controller window will appear, along with the
Login Information dialog box.
To log into the CMS server, do the following:
1. Double click on the Supervisor icon in its program group. The Supervisor
Controller window appears, along with the Login Information dialog box
in the forefront, as shown below:
2. Select the CMS Server from the pull-down list of servers.
3. Select the CMS Version from the pull-down list. Version 8 Supervisor is
compatible with either R3V6 CMS or R3V8 CMS. You must select the
version of CMS that is on the server you have selected. If you select the
wrong version of CMS, you will receive an error message. See Chapter 9,
“Troubleshooting,” for more information.
2. Login ID: Text Box
3. Password: Text Box
4. History list of Login IDs
1
2 3
1. CMS Server: Text Box
4