Lucent Technologies CentreVu Supervisor, Руководство по установке и началу работы

Страница: 59 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Installing CentreVu Supervisor on a Shared Network Drive
Installation Procedures
3-9
Client Setup
3
The client setup program sets up the client computer to access CentreVu
Supervisor from the network server. Supervisor setup installs the application
files on the network, while client setup installs on the client PC only the user-
specific files needed to run Supervisor.
NOTE:
You must run client setup from the physical PC that the client will use to access
Supervisor. If you simply log into the network as each user and then run client
setup, the program will not install properly.
To set up a client PC, do the following:
1. Before starting the installation, close all running programs on the PC.
2. In Windows Explorer or Network Neighborhood (Windows 95 or 98 or
Windows NT 4.0), navigate to the directory where CentreVu Supervisor is
installed.
3. Locate and then double-click on the setupclt
.
exe file.
4. After a short wait, the CentreVu Supervisor 8.0 Installation Welcome
window appears.
5. Select Next. Setup begins searching for a previous installation of
Supervisor on your PC.