Lucent Technologies CentreVu Supervisor, Руководство по установке и началу работы

Страница: 193 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Using CentreVu Supervisor Reports
Using Page Setup
7-55
The following options are available in the Page Setup window:
●
Margins—lets you define the spaces at the edges of the page where
nothing will be printed. The margin settings are defined as follows:
— Top—the margin is measured from the top of the page. The report is
offset by this amount at the top of each page.
— Bottom—the margin is measured from the bottom of the page. When a
printed table reaches the bottom of the page, it will continue printing at
the top of the next page, with the table titles repeated. If a chart would
overlap the bottom margin, it is scaled smaller so that it fits within the
margin. Text that reaches the bottom of the page is printed on the next
page.
— Left—the margin is measured from the left of the page. The report is
offset by this amount on the left of each page.
— Right—the margin is measured from the right of the page. Tables and
text that are too wide to fit on the printed page are truncated at the right
margin. Charts that would overlap the right margin are scaled smaller
to fit within the margin.
●
Page Numbers—lets you choose whether or not to display page numbers.
The following settings are valid:
— Yes—page numbers will be displayed.
— No—page numbers will not be displayed. This is equivalent to the way
CMS currently prints reports.
●
Box Around Tables—allows you to choose whether or not to display a
box around report tables when printed. The following settings are valid:
— Box—boxes will be displayed.
— No Box—boxes will not be displayed.