Lucent Technologies CentreVu Supervisor, Руководство по установке и началу работы

Страница: 175 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Using CentreVu Supervisor Reports
Formatting Chart Reports
7-37
Data Labels Tab
7
The Data Point Labels tab allows you to control the location of the data point
labels.
The following parameters can be specified:
●
None—labels are not displayed.
●
Above Point—displays the label above the data point. This location is
valid only for bar, line, area, and step charts.
●
Below Point—displays the label below the data point. This location is
valid only for bar, line, area, and step charts.
●
Center—displays the label centered on the data point. This location is
valid only for bar, line, area, and step charts.
●
Base—displays the label along the category axis, directly beneath the data
point. This location is valid only for bar, line, area, and step charts.
●
Inside—displays the label inside a pie slice. This location is valid only for
pie charts.
●
Outside—displays the label outside a pie slice. This location is valid only
for pie charts.