Lucent Technologies CentreVu Supervisor, Руководство по установке и началу работы

Страница: 150 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Using CentreVu Supervisor Reports
Report Menu Bar
7-12
Report
7
The Report menu has the following options that relate to the report you are
running.
Menu Item Action
Restart Closes the current report output window and displays the input
window for the current report. This allows you to run the same
report, changing inputs as needed.
The Restart menu item will be grayed out if you are currently
running a drill-down report. This is disabled for Drill-Down
reports and if the report is an unsaved report created using the
Report Wizard (this item is enabled when the report is saved).
Page
Setup... Displays the Page Setup window. See “Using Page Setup” on
page 7-54 for more information.
Print... Displays the Print window. See “Selecting a Printer” on page 7-53
for more information.
NOTE:
When you select Print from the Report menu, the report that is
active will be printed according to the options you choose in the
Print window. If the report is a real-time report, only one refresh
of the report will be printed.
Print
Preview... Displays the report so that you can see it before printing.