Lucent Technologies CentreVu Supervisor, Руководство по установке и началу работы

Страница: 107 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Getting Started with CentreVu Supervisor
Exploring the CentreVu Supervisor Controller
5-33
Advanced... This menu item is used for debugging purposes. Do not
change the settings on the Advanced window unless you
are instructed to do so by a Lucent Technologies associate.
Add Button Selecting the Add Button tool starts the Add Button
wizard, which steps you through the process of creating a
button and adding it to the toolbar.
Remove
Button... Selecting the Remove Button tool displays a window that
tells you how to remove a button from the toolbar.
System Setup When you select System Setup from the Tools menu or
select the CMS System Setup button on the toolbar, the
CMS System Setup selector window opens. The only
active tab in the CMS System Setup tool is the Operations
tab.
From CMS System Setup you can view and modify
information relevant to how the CMS and switch were
configured during installation.
Maintenance When you select Maintenance from the Tools menu or
select the Maintenance button on the toolbar, the
Maintenance selector window opens. You will see the
following tabs to choose from:
●
Operations
●
Reports.
Maintenance is where you perform routine maintenance
of the CMS, including backing up data, checking on the
status of the connection to the switch, and scanning the
error log.
Menu Item Action