Lucent Technologies CentreVu Report Designer Скачать руководство пользователя

Страница: 138 / 266

Insert | Field

CentreVu Report Designer Version 8 User Guide

Inserting Data Item Fields on the Report

9-4

Inserting Data Item Fields on the Report

Do not position the field on top of any grids or charts because the
grid/chart will display on top of the field and the field will not be visible.

Before you can insert a data item on a report, the data item must be used
in a query that is associated with this report

To insert data item fields on the report, complete the following steps:

1. Select Field from the Insert menu.

The Field Assistant wizard opens.

2. Highlight Data Items in the Types box.

3. Select the Next button.

The “Select a query and associated data item for this field” window
appears.

4. Highlight the name of the query from which you would like to select

the data item.

The available data items for the selected query display in the
Available Data box.

5. Highlight the data item that you want to display on the report.

6. Select the Done button.

The Data Item field is placed in the upper left-hand corner of the
report.

7. Click on the item and drag-and-drop it to the location at which you

would like it displayed in the report.

Содержание CentreVu Report Designer











































































































































































































































































Результаты поиска

Содержание CentreVu Report Designer

Отзывы:

Похожие инструкции для CentreVu Report Designer

Бренды по названию

Популярные бренды

Lucent Technologies CentreVu Report Designer, Руководство пользователя

Результаты поиска

Содержание CentreVu Report Designer

Отзывы:

Похожие инструкции для CentreVu Report Designer

Бренды по названию

Популярные бренды